Jobsite delivery progress
14100 Whitney Road, Gainesville, VA 20155
Loading delivery progress…
Based on issued delivery tickets dated today or earlier. One ticket counts as one trip; reprints and edits do not add trips. Drafts and other destinations are excluded. Quantities are capped at the project quantity for each piece mark; individual units are not assigned.
Review repeated ticket quantities
Visual inspection progress
Physical pieces with a recorded visual inspection, with and without welding.
Loading progress…
Welded pieces
— inspected de — · — pending
—%
Pieces without shop welds
— inspected de — · — pending
—%
Point the camera at the label QR code.
Structural bolts · shop drawings
Field bolt totals from the bills of material; each quantity covers all pieces under that mark.
Square plate washers · shop drawing G2
| Plate mark | Quantity | Dimensions | Thickness | Hole diameter | Material grade | Assigned piece marks |
|---|---|---|---|---|---|---|
| P6 | 56 | 3″ × 3″ | 1/2″ | 1-1/16″ | ASTM A572 Grade 50 | Not confirmedNo column or beam reference found in the supplied shop drawings |
| P9 | 312 | 2-1/2″ × 2-1/2″ | 1/2″ | 13/16″ | ASTM A572 Grade 50 | Not confirmedNo column or beam reference found in the supplied shop drawings |
| P13 | 180 | 2″ × 2″ | 1/2″ | 9/16″ | ASTM A572 Grade 50 | Not confirmedNo column or beam reference found in the supplied shop drawings |
| P4 | 56 | 3″ × 3″ | 1/4″ | 1-1/16″ | ASTM A572 Grade 50 | Not confirmedNo column or beam reference found in the supplied shop drawings |
| Total | 604 | 548 at 1/2″ thick · 56 at 1/4″ thick | ||||
Source: G2, PDF page 125. Square plates are counted separately from the HD washers in the bolt BOM. G2 does not identify the column or beam piece marks receiving these plates; assignments are not confirmed.
View shop drawing G2 · page 125Hardware specifications below are compatible selections, not additional drawing callouts. Nuts: estimated at one per bolt; the BOM does not list them separately. Washers: only the HD washers specified in the BOM; no washer quantity is specified for A307 bolts. An erection note on page 12 lists six A325N 3/4″ × 2-1/2″ bolts without assigning a piece mark; they are shown separately and excluded from the total to avoid double counting.
Columns by grid · drawing E1
Select a vertical bay to see the horizontal grids and columns at each location.
Open full E1 drawing ↗Columns on a shared vertical grid appear in both adjacent bays. Repeated marks represent different positions; E1 does not assign a physical label number to each location. This selector covers the columns on drawing E1.
